Advanced search:
No Calendar Events Found or Calendar not set to Public.

Your Cart is currently empty.

New JDV Wire Wrap Tools Catalog


View Full-Size Image



Price per Unit (pc): $ 692.00

Ask a question about this product

Super Slim Nozzle Type Ionizer!
(Only 4.3”L x 1.1”W x 1.1”H)

  • Very Accurate Ion Balance ± 10V
  • Super Slim & Compact Design
  • Unique Rotary Corner Nozzle
  • LED Operating Status & High Voltage Alarm
  • Daisy-Chain Multiple Units Together
  • Screw-Type Nozzle for Easy Maintenance
  • Simple and Easy Mounting


VESSEL’s new Super Slim Nozzle-Type Ionizer (Model# N-1) features an outstanding ionizing performance with a unique “rotating” nozzle all within an ultra-compact body for easy installation in space-restricted areas. Designed to neutralize static charges and for the removal of dust by using the powerful blow of compressed air or nitrogen gas.

The N-1 incorporates an AC Corona discharge method for secure ion balance and a reliable high-frequency piezoelectric transformer that generates ions efficiently for minimizing ion loss.  With a very accurate ion balance within ± 10V, this unit has a powerful airflow for effective cleaning (up to 87psi) with quick decay time less than 0.7 seconds (estimated at a distance of 6” using 43.5psi). 

This unit comes with a standard straight nozzle and a rotary corner nozzle.  The unique corner nozzle can rotate every 90 degrees to change the air-blow direction.  This design alleviates the need to distribute ions through a “tube”, which can reduce ion performance as the ions travel over the length of the tube and may result in ion loss.

The front panel of the unit is equipped with easy to see LED lights for operation status.  A “blue” LED indicates good working condition and a “red” LED signals high voltage error.  For safety, the N-1 unit has an automatic shut off function for against abnormally high voltage and an integrated current dependent fuse protects its circuit board.


The built-in 6-terminal connector enables up to four units to be daisy-chained together by using one 24VDC power source and high voltage warnings can be sent to external equipment.

The “screw-type” nozzle construction allows for easy maintenance.  The stainless steel electrode needle (#N-1H) is protected inside the nozzle and can quickly be cleaned or replaced by using the optional removal hand tool (#G-7DR).

Ideal for various applications such as for the elimination of fluid spills in filling lines, mounting onto chuck panels (EOAT), prevention of part feeder blockages, to clean surfaces before a coating process such as painting, before applying labels or ink, printing, ect.


Weighs only 0.14 lbs with standard nozzle, 0.13 lbs with corner nozzle




Normal Operation

High Voltage Detected


Connect Multiple N-1's

to the Same Power Source
Connect Multiple N-1 Ionizers to the Same Power Source



N-1 Ionizer, Corner Rotary Nozzle, Standard Nozzle, User's Manual


Ion Balance ± 10V, ± 1000V→100V; Discharge time: < 0.7 seconds at 6" using 43.5psi

CE Approved, RoHS

(Not Available for sale in Canada)

Feature Benefit

Very Compact / Low Profile Design
(Only 4.3” Long, 1.1” Wide, 1.1” High)
Compact, lightweight plastic body

  • Ideal for space restricted areas
  • Light enough to mount onto auxiliary equipment, end-of-arm-tooling, etc.
  • Mounting screws and air inlets on both sides of the unit make it very easy to install on any surface

Rotating Corner Nozzle
Locks in place every 90 degrees

  • Covers a 360 degree area
  • Easily changes air-blow direction
  • Minimized resistance in a tube shaped area

LED Indicator Detects Operating Status
Part of top cover glows “blue” during operation and “red” when stopped due to a malfunction.

  • Operators can visually see operating status at all times
  • LED is very visible across room so operators can quickly and easily see operating status at all times

Safety Design for H.V. Malfunction
Stops automatically in the event of a high-voltage malfunction. Device includes an alarm output terminal.

  • Helps prevent the unit from being damaged
  • Alarm output can communicate information to external equipment

Very Accurate Ion Balance ± 10V
(6” from surface, 43.5psi, w/standard nozzle)

  • Quick decay time less than 0.7 seconds
  • Can blow off dust, debris, and contaminant particles effectively at a high air pressure

"Daisy-Chain" Multiple Units
Using one 24V power source, the power and H.V. alarms on multiple units can be output and linked together

  • Only one power source needed for multiple units, which reduces cost
  • Makes installing multiple units easy which saves valuable time

Easy Maintenance / Screw-Type Nozzle
Electrode needles can be easily cleaned and replaced by operator using electrode needle removal tool (G-7DR).

  • Prevents maintenance downtime
  • Very user-friendly to change part in seconds
  • Nozzle protects electrode needle from being hit or bumped

CE / RoHS Approved
Designed and manufactured in compliance with EU standards, all tests are carried out in compliance with the principles of the EMC Directive

  • Ensures customer that they are using high quality product that carries CE and RoHS markings


Ion Generation Method  Piezo high-frequency AC Corona discharge
Applied Voltage
 5.0kVAC (p-p)
Input Voltage  24VDC ±5% ripple (p-p) 10% or less
Power Consumption  100mA
Applied Source
 Clean Air or Nitrogen Gas: 14.5~87psi
Ozone Generation  0.05ppm or less (measured at 2" from device at 29psi)
Working Temp. Range /
Working Humidity Range
 32~140°F / 35~85% RH (no dewing or freezing)
Decay Time
 Refer to PERFORMANCE tab
Weight  0.14 lb (62g) with standard nozzle
0.13 lb (61g) with corner nozzle
Ion Balance  Within ±10V (with standard nozzle, measured 6" from device, at 43.5psi)
Materials  Body & Nozzle: Flame-retardant ABS Resin
 Needle Pole Electrode: Stainless Steel





Voltage Decay



G-7DR Electrode Needle Removal Tool

G-7F Inline Micro Air Filter

G-7SC Speed Controller


Electrode Tool

Micro Inline Air Filter
Removes at least 99% of particles with a Ø0.01µm

Speed Controller


CA138 - N-1 Very Slim Nozzle Ionizer  

alt Required to view Product Flyer

Last Updated: Monday, 24 January 2022 19:24