VDK-1

Equipped with a special high-grade steel blade, the VDK-1 is the perfect item to add to your toolbox. This knife is ideal for electrical, service work, or for any general cutting application.

 Locking Holder
When not in use, always keep the knife in the holder with the safety lock enabled

• 1. Slide the sleeve down and insert the knife into the holder
• 2. Slide the sleeve upward until you hear a CLICK, indicating the the knife is safely secured in the holder

How to Use the Ceramic Sharpener
Wear a non-slip glove and confirm the are is clear of other people before using this sharpener

The included ceramic sharpener can be used to touch-up the blade surface.

1. Hold the sharpener firmly and place the blade on the ceramic rollers
2. Slide the one face of the blade in the direction of the arrow

3. Repeat for the other blade side, as both sides should be properly sharpened

4. Chipped blades cannot be sharpened with the ceramic sharpener. Please used an oiled sharpening stone to sharpen chipped blades

Required to view Product Flyer